Standing water on your flat roof? Here's what to do.
Honest answers from TruRoof, TPO and EPDM flat roofing in Dayton, KY.
You have a flat commercial roof in Dayton, KY. After a heavy rain, you see standing water that just sits there. Days later, it's still pooled up. You worry about leaks, mold, and what it's doing to the roof. You need a solution that drains the water and protects your building.
Ponding water on a flat roof is a sign your drainage isn't working right. It could be a clogged drain, a sag in the roof deck, or a section of the membrane that has settled. On TPO or EPDM roofs, water that sits for more than 48 hours can start to break down the membrane. Left alone, it can lead to leaks and structural damage. That's why you need to act now.
Fixing standing water usually starts with a roof inspection. The cost depends on what's causing the problem. Cleaning drains and making minor repairs might be a few hundred dollars. If the roof has large low spots, you may need to add tapered insulation or fix the roof structure, which costs more. For a full replacement with TPO or EPDM, expect a bigger investment, but it solves the problem for decades.
Start by calling a commercial roofer for an inspection. Don't try to sweep the water off or puncture the membrane to drain it. That can make things worse. TruRoof can inspect your roof, find the cause of the ponding, and give you a clear plan. You'll know exactly what needs to be done and what it will cost. Call now to schedule a visit.
Once the drainage is fixed, your roof will dry out quickly after rain. No more standing water. No more worry about leaks. Your TPO or EPDM roof will last for years, protecting your business from the inside out. You'll have peace of mind every time it storms.
What people in Dayton say
"I'm reviewing my two new roofs, on my house and my garage, installed by TruRoof. The company, and Damon Chuke, their representative, helped me work with the insurance company, and with understanding all the details of the whole process. They took out an obsolete chimney, were on time and professional, and the finished roofs and flashing are beautiful. Many compliments from neighbors. Highly recommended by me."
"We have a beautiful condo in a historic building from the 1840s. Late November had a bad leak in the dining room area. I called Britt at TruRoof who came out and inspected the entire roof of the building. He said to do the entire roof could be around $50,000. But then he started laughing and said you need to caulk the area around one of the chimneys. I thought he was nuts, but I did the caulking, which cost me about 25 bucks worth of outdoor caulk, and there are no more leaks. I cannot express my appreciation for his diligence and his honesty. That kind of a company and a person is rare these days. Highly, highly, highly recommend these guys."
"TruRoof did an outstanding job from start to finish. Communication leading up to the start date was great. Once on site and the project started, everything went as discussed, and the crew was very professional."
Other things people in Dayton ask
what are the downsides of tpo roofing
Seam quality and membrane thickness decide TPO lifespan. We show you the spec, not just the price.
which lasts longer tpo or epdm
EPDM is proven for decades, TPO reflects heat and welds at the seams. We explain which fits your building and budget.
TPO roof cost per square foot
TPO roofing typically costs $5 to $9 per square foot installed, including tear-off and insulation. Get multiple quotes. TruRoof can provide a detailed estimate based on your building's specifics.
small tear in TPO roof repair
Do not tape it. A small tear can let water in and ruin insulation. Wind can peel it open. A professional heat-weld repair is fast and permanent. Fix it now before it becomes a big leak and a big bill.
Ready to talk?
TruRoof handles tpo and epdm flat roofing in Dayton and the area around it.