Standing water on your flat roof?
Honest answers from TruRoof, TPO and EPDM flat roofing in Milford, OH.
You run a business in Milford, maybe a shop on Main Street or a warehouse off I-275. Every time it rains, you see water pooling on your flat roof. It stays for days, and you worry about leaks or a sagging ceiling. Ponding water is a sign of a drainage problem that can damage the roof membrane and structure.
Flat roofs are meant to drain, but sometimes water gets trapped. If your TPO or EPDM roof has puddles that last more than 48 hours, you have a ponding problem. This often happens because drains are clogged, or the roof surface has settled in spots. The weight of the water can stretch the membrane and eventually cause leaks.
The cost to fix ponding water on a flat roof depends on the cause. A clogged drain or a small seam repair might only cost a few hundred dollars. If the roof deck has settled and needs a new layer of TPO or EPDM, the price can be higher. Most commercial repairs in Milford run between $1,500 and $5,000. A full roof replacement is a bigger job, but sometimes the only way to fix severe ponding.
If you have standing water on your flat roof in Milford, call TruRoof for an inspection. We will check your drains, seams, and roof slope. Do not ignore the water, even if it dries up. The next storm could push it through the membrane. Get a professional opinion this week.
After the repair, water will flow off your roof like it should. You will not see puddles after a rain. The roof membrane stays strong, and your business stays dry. You can focus on running your shop, not watching the weather.
What people in Milford say
"I'm reviewing my two new roofs, on my house and my garage, installed by TruRoof. The company, and Damon Chuke, their representative, helped me work with the insurance company, and with understanding all the details of the whole process. They took out an obsolete chimney, were on time and professional, and the finished roofs and flashing are beautiful. Many compliments from neighbors. Highly recommended by me."
"We have a beautiful condo in a historic building from the 1840s. Late November had a bad leak in the dining room area. I called Britt at TruRoof who came out and inspected the entire roof of the building. He said to do the entire roof could be around $50,000. But then he started laughing and said you need to caulk the area around one of the chimneys. I thought he was nuts, but I did the caulking, which cost me about 25 bucks worth of outdoor caulk, and there are no more leaks. I cannot express my appreciation for his diligence and his honesty. That kind of a company and a person is rare these days. Highly, highly, highly recommend these guys."
"TruRoof did an outstanding job from start to finish. Communication leading up to the start date was great. Once on site and the project started, everything went as discussed, and the crew was very professional."
Other things people in Milford ask
what are the downsides of tpo roofing
Seam quality and membrane thickness decide TPO lifespan. We show you the spec, not just the price.
which lasts longer tpo or epdm
EPDM is proven for decades, TPO reflects heat and welds at the seams. We explain which fits your building and budget.
TPO roof cost per square foot
TPO roofing typically costs $5 to $9 per square foot installed, including tear-off and insulation. Get multiple quotes. TruRoof can provide a detailed estimate based on your building's specifics.
small tear in TPO roof repair
Do not tape it. A small tear can let water in and ruin insulation. Wind can peel it open. A professional heat-weld repair is fast and permanent. Fix it now before it becomes a big leak and a big bill.
Ready to talk?
TruRoof handles tpo and epdm flat roofing in Milford and the area around it.